AE auto battery power supply

AE auto battery power supply
This Battery Conditioner & Charger(BCC 2405-2)
AE auto battery power supply
This Battery Conditioner & Charger(BCC 2405-2)
- Revive badly sulfated battery by breaking the lead sulfate crystals
- Recondition deeply discharged battery by microprocessor controlled switching mode charging
so as to recover and reuse your battery, increase the battery life and performance, and protect your battery from being overcharged

Battery Conditioner & Chargers: BCC 2405-2

This Battery Conditioner & Charger incorporate the reconditioning process to recover deeply discharged batteries especially found in deep cycle batteries, by using latest Inverter technology (high frequency switching circuitry which converts incoming AC input into 24V DC outputs).
Its built-in microprocessor chip constantly senses the condition of the battery during the whole charging process, and providing the accurate Amperage and Voltage to the battery basing on the 7 designated charging stages requirements.
If it finds that the battery has failed after it has conducted the battery test, it will immediately start the reconditioning process where it introduces low constant current at high voltage (16V) to charge the battery for 4 hours before it begins another test.

The other major features are:

- Microprocessor control charging that always monitor the battery conditions during operation to
determine the correct action that it should take.
- Accurate in determining the amount of current and voltage during charging which never
overcharges a battery.
- With its automatic 7- stages switching mode:
Desulphation, Soft-start, Bulk, Absorption,

Battery

Test, Recondition and Float
has made charging much easier, quicker and safer on
all types of 12V batteries with no worries of disconnecting the battery after full charge.
It can be left connected infinitely without harming the battery but helps to maintain its charged
level by its Float process (Trigger charging).
- Its Desulphation process helps to break down sulphate that occurs in battery which has been
left flat for extended periods of time or when lead sulphate hardens and clog up the battery
cells. This helps to restore lightly sulphated batteries back to its best state.

- Incorporated with Reverse Polarity protection circuit, it does not create any sparks during
connection.
- Highly efficient: Produces less heat during charging due to less energy loss.
- Light in weight and compact in size compared with traditional liner charger.
- Temperature controlled cooling fan.
- Charging process indication by flashing LED.