AE BATTERY PERFORMANCE ANALYSER (BPA-11) - Auto Battery Tool

AE Auto Battery Tool
Performs 2 tests
Determines both the state of charge and state of health of a battery
AE Auto Battery Tool

AE Battery Performance Analyser ( BPA-11 )
This
AE

Battery Performance Analyser (BPA-11)
performs 2 tests
1. Battery Condition Test
2. Voltage Drop Load Test

To determines both the state of charge and state of health of a battery.

Only with these combination of tests is able to explicitly determine the actual performance (not only condition) of a battery.
Description:
State Of Charge (SOC), or conversely, the depth of discharge (DOD) can be determined by measuring the voltage and/or the specific gravity of the acid with a hydrometer. This will NOT tell you how good the battery condition is - only a sustained Load Test can do that.
This
AE

Battery Performance Analyser (BPA-11)
not only tests the battery's current voltage and power, it comes with voltage drop test during cranking the engine to determine whether the battery has aged.
A.Battery Condition Test
shows results:
1. Battery conditions: Good or Replace
2. Battery state of charge: in Volts.
3. Battery rating : CCA (Cold Crank Amp)
4. Battery cell : in m ohm
5. Battery Life Expectancy: in percentage (%)

B. Voltage Drop Test
: to observe the behavior and determine the health of the battery while cranking the engine.
These tests are conducted by its built in microprocessor using the latest battery testing technology which will not harm the battery and its results are fast, consistent and accurate.
It tests all types of 12 volts automotive batteries ranging from WET, MF, CMF, AGM and Gel Cell types.
Advantages:
- Intelligent

Able to detect and remove surface charge if any, before commencing test for better results.

- Accurate

Consistent and accurate test results.

- Fast

Takes less than 5 seconds to compute the results.

- Direct

Test can be done on or off the car. Also can test on weak or discharged batteries.

- Safe
Does not create sparks during clamping and wrong polarity protected during testing.

- Maintenance Free

No internal batteries required.
User Friendly:
The operation is fast and simple. When hooked up to the battery posts, the displayed instructions on the screen will lead you through to perform the correct steps.
In the event that you need assistance, the "HELP" key will display information about each function when selected.
Product Specifications:

Operating Voltage: 9~15 Volts
Testing Capacity: CCA 100 ~ 1700 Amps
IEC 100 ~ 1700 Amps
JIS 100 ~ 1700 Amps
DIN 100 ~ 1000 Amps
EN 100 ~ 1000 Amps
Analysing Time: Less than 5 Seconds.