Auto battery /hybrid electric vehicle lithium battery 336V 60Ah
Environmental friendly
Long cycle life
powerful
Very safe
Auto battery /hybrid electric vehicle lithium battery 336V 60Ah
Rated voltage:
336V
Cut-off voltage:
262.5V
Max charge voltage:
383.25V
Max constant discharge rate
≤ 1.5C
Max instant discharge rate
≤ 2C
Max charge rate
≤ 1C, better 0.5C
Cycle 2000times with 0.2C -1C discharge current
With balance BMS and charger
1/3 weight of SLA battery
China's biggest lifepo4 manufacturer and supplier with comprehensive solutions
Powerful:
discharge with 10c , battery’s temperature does not exceed 65c
Long in cycle life:
the cycle life of the battery pack can reach 2000times.
Lower average price per year:
the average price per year is 100 Yuan RMB less than the lead-acid battery for 5 years.
Small in volume and light in weight :
the iron-lithium battery is about 1/2 the volume and 1/3 the weight of the lead-acid battery.thus the performance of the whole bike is improved and battery can be taken off easily.
Green battery to protect environment :
the lead-acid battery will pollute the environment seriously because of frequent replace, but the iro-lithium battery is green power without pollution.
Very safe and reliable:
the iron –lithium battery is more safe and reliable than the lead acid one . it does not explode or burn when bump, heavy stress, needle pricking ,short circuit ,overcharge and overheat.
Intelligent charge system:
voltage of each cell can be detected ,each cell can be protected against overcharge, overvoltage ,short circuit and overheat , and so that battery can be charged balance.
The capacity of readout power volume :each battery has 5LED lights to readout the capacity of the battery.
Patented and beautiful appearance:the appearance designed by patent can be integrated with the hole cars.
Built in with BMS
1.programble thresholds and monitor each cell's voltage, cell's group temperature,and current.
2.progarmable cell balance during charging and or after charging.
3.normal"open" relay switch out put for charge and discharge protection.
4.charging protection:switch turn to "close" when cells' over voltage, over temperature, over current,not within preset thresholds.
No comments:
Post a Comment