UltiPower 24V 15A Reverse Pulse Auto battery Charger

1.24V 15A reverse pulse auto battery charger
2..Full automatic MCU control
3.Ruggedized&heavy duty design
UltiPower 24V 15A automatic reverse pulse auto battery charger

Feature
Switchmode Technology
Using the latest technology in battery chargers, switchmode chargers convert 240VAC power to 12VDC
power using electronic components, unlike traditional battery chargers that rely on large heavy transformers.
This allows the charger to be lightweight and compact without sacrificing performance.
.
L.E.D
Realtime battery voltage Display

A volt meter determines the battery charge level while the Amp meter displays how much power is being
delivered into the battery.
Intelligent
current control
, the
latest pulse charge technology
enables the current "keep changing" due to the battery voltage and its internal temperature, which is the most important consideration in managing the charge cycle . The digital display pulse charger will constantly

Monitoring battery temperature and voltage
, thus control the charging cycle and current. Enabling the best current acceptance during any charging stage.
Avoid battery over charged by maintanece charge intruduced.
JLSTAR Pulse Charger
works to prevent sulfation buildup by removing the sulfate deposits from the battery plates through a unique Ion Transfer process. The lead sulfates then return to the battery acid as active electrolyte. When connected on a regular basis, our battery maintenance systems will also keep the sulfates from building up again.
Electrical Parame

Item
Parameters
Description
Input voltage
and Frequency
AC95V~AC260V
Frequency50HZ-60HZ
Input current
<1.5A
Test Conditions
Minimum input voltage, output for full load
Input protection
5.0A 250VResistance
Damage in the event of fault conditions will be blown resistor
Work efficiency
87%
Test ConditionsRated input voltage and full load output
No-load output voltage
55.5±0.5V
Not access the battery and any other load
Output average current(Constant current
15A±0.15A
When the ambient temperature 25
0
C,(Attention
At the beginning of charge state ,the charge current can up to more than 4.7A in the transient time .)
Conversion Current
(Turnlamp current)
1.3±0.2A

Charge limit voltage
Constant
24V±0.3V
Ambient temperature
25
0
C(With temperature compensation, with temperature changes)
Charge to maintain voltage
Float

Ambient temperature
25
0
C
Pulse time of occurrence
After entering the maintenace charing cycle
According to automatically adjust the degree of cell polarization pulse time, no class variable



Short-circuit protection
Case of output short circuit protection of power supply will enter a status, and failure to lift automatically resume normal.
Polarity protection.
Prevents the output leads from sparking due to accidental reverse connection or short circuit,
increasing safety.